Pipe burst flooding your home
We shut off the water, extract standing water, and dry the structure. We also document the damage for your insurance claim and can repair the pipe if needed.
When a pipe bursts at 2 a.m. or a storm pushes water into your living room, every minute counts. Our water extraction in Florida teams remove standing water, dry your structure, and prevent mold before it starts. We serve homeowners, renters, and property managers statewide, with trucks staged to reach you fast. One call gets water removal Florida done right.

Water extraction in Florida is the mechanical removal of standing water from floors, walls, and cavities using truck-mounted and portable extraction units. It is not a shop vac and a fan. We use moisture meters, thermal imaging cameras, and hygrometers to map exactly where water traveled, then pull it out with high-capacity pumps and extractors. After extraction, we set up air movers and dehumidifiers to dry the structure to IICRC standards, usually within three to five days.
Florida homes face water intrusion from slab leaks, pipe bursts, roof leaks, appliance failures, and storm surge flooding. Our humid climate means mold can begin growing within 24 to 48 hours, so fast water extraction and removal Florida is critical. We handle everything from a single-room appliance leak in Davie to commercial water extraction Florida for a warehouse in Jacksonville. If you search for water extraction near me, we are already on the way.
Our standard water extraction service covers the full process from emergency response to final drying. We also offer additional services like mold remediation and reconstruction if needed. Here is what you get when you call us.
We answer calls 24 hours a day, 7 days a week, including holidays. We dispatch the nearest crew immediately and provide an ETA. You get a real person on the phone, not a call center.
We remove standing water using truck-mounted extractors and pumps. We extract from carpets, hardwood, tile, and concrete. We also use weighted extraction for carpets to pull water from padding.
We use moisture meters, thermal imaging cameras, and hygrometers to find hidden water behind walls and under floors. This ensures we dry the entire affected area, not just the visible surface.
We set up air movers and dehumidifiers to dry the structure. We monitor moisture levels daily and adjust equipment until dry standard is met. This typically takes three to five days.
We apply antimicrobial spray to affected areas to prevent mold growth. This is especially important in Florida's humid climate, where mold can start within 24 hours.
We document the loss with photos, moisture readings, and Xactimate estimates. We bill your insurance directly and help you navigate the claims process.
You call, we answer 24/7. We ask a few questions to understand the source and severity, then dispatch the nearest crew. In most Florida metros, we arrive within 60 to 90 minutes. You get a call or text with the technician's name and ETA.
On arrival, we inspect the affected area and trace the water source. We use moisture meters, thermal imaging cameras, and hygrometers to map the extent of saturation. We also check for safety hazards like electrical risks or sewage contamination. You get a clear explanation of what we found and what we recommend.
We remove standing water using truck-mounted extraction units and portable pumps. For deep water, we may use a sump pump or submersible pump first. We extract from carpets, hardwood, tile, and concrete. This step typically takes two to four hours depending on the volume and area.
After extraction, we set up air movers and dehumidifiers to dry the structure. We may use a dehumidification desiccant for tough jobs. We monitor moisture levels daily and adjust equipment until materials reach dry standard. This phase usually takes three to five days.
Once dry, we do a final walkthrough with you. We take moisture readings, confirm everything is dry, and provide a complete report for your insurance claim. We also give you tips to prevent future water issues. You get peace of mind and a documented record of the work.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Used to measure moisture content in drywall, wood, and flooring. Helps us find hidden water and monitor drying progress.
Detects temperature differences to reveal water behind walls and under floors without cutting into surfaces.
Measures relative humidity and temperature to calculate dew point and ensure proper drying conditions.
High-velocity fans that circulate air to evaporate moisture from surfaces and materials.
Removes moisture from the air to speed drying and prevent secondary damage. We use Santa Fe dehumidifiers.
Truck-mounted or portable units that vacuum water from carpets and hard surfaces. We use Dri-Eaz and Phoenix equipment.
A camera on a flexible tube used to inspect inside walls and crawl spaces for hidden water or mold.
A supply line burst under the sink, flooding the kitchen and dining room. Water soaked hardwood floors and wicked up drywall. The homeowner called us at 3 a.m.
We extracted 50 gallons of water, dried hardwood in place, and replaced 12 square feet of drywall. Moisture readings returned to normal in four days. The insurance claim was approved without dispute.
A hurricane pushed 6 inches of contaminated water into a beachside home. Carpet, baseboards, and lower drywall were soaked. Mold started growing within 48 hours.
We removed contaminated materials, extracted water, and applied antimicrobial spray. After drying, we rebuilt the affected areas. The home passed a mold clearance test.
A slab leak went unnoticed for weeks, causing warped hardwood and a musty odor. Moisture meters showed saturation 10 feet from the visible damage.
We located the leak with thermal imaging, extracted water, and dried the slab. We replaced 200 square feet of hardwood. The homeowner avoided a $15,000 mold remediation bill.
Florida homes face unique water challenges, from hurricanes to high humidity. We handle all types of water intrusion, big or small. Here are some of the most common problems we solve.
Ask a pro →We shut off the water, extract standing water, and dry the structure. We also document the damage for your insurance claim and can repair the pipe if needed.
We use thermal imaging and moisture meters to locate the leak and map the moisture. We extract water, dry the slab, and recommend a plumber for repairs.
We treat floodwater as category 3, using PPE and antimicrobial spray. We extract, dispose of contaminated materials, and sanitize the area.
We extract water from cabinets and floors, use boroscopes to check behind walls, and dry the area. We also apply sealant to prevent future leaks.
Most residential water extraction jobs in Florida cost between $500 and $3,500, depending on the area affected and water category. A small appliance leak might run $500 to $1,200, while a whole-room flood can exceed $3,000. We provide a written estimate before work begins and bill your insurance directly when covered.
Water extraction in Florida is the process of removing standing water from your property using specialized pumps and extractors. It is the first step in water damage restoration, followed by drying and dehumidification. We use moisture meters and thermal cameras to find hidden water, then extract it and dry your structure to IICRC standards.
The extraction itself usually takes two to four hours for a typical residential job. Drying and dehumidification take another three to five days, depending on materials and humidity. We monitor moisture daily and adjust equipment until your home is dry. You can usually stay in your home during the process unless sewage is involved.
Yes, most homeowner policies cover water extraction when the damage is sudden and accidental, like a pipe burst or appliance failure. Flood damage requires separate flood insurance. We work with all major carriers, document the loss thoroughly, and bill them directly. We also help you understand what your policy covers before we start.
We deliver water extraction in Florida statewide, with crews positioned to respond quickly in major metros and surrounding areas. Whether you are in Jacksonville, Tallahassee, or North Fort Myers, we have a team nearby. We handle both residential and commercial water extraction Florida jobs, and we bill insurance directly.
We are available 24/7 for emergency water extraction Florida. Call now and we will dispatch the nearest crew to remove water and start drying. Same-day service, direct insurance billing, and a written estimate before we begin.
Call Now 0001112222 →Call 0001112222 and describe what is wet. We answer 24/7, including holidays, and dispatch a licensed, insured crew to your Florida address. If water is still running, shut off the main before you call so the damage stops spreading.