Water Damage Restoration in Florida means stopping the water, extracting it fast, and drying your structure before mold takes hold. Our IICRC-certified crews handle pipe bursts, storm surge, slab leaks, and sewage backups in homes and businesses statewide. We answer calls 24/7, arrive with extraction and drying equipment, and document everything your adjuster needs. One call gets water damage cleanup Florida property owners can trust.
Water Damage Restoration in Florida is the multi-step trade of removing standing water, drying structural cavities, and returning a building to pre-loss condition. It is not shop-vac work. We map moisture with a thermal imaging camera and moisture meter, extract with truck-mounted water extraction units, then place air movers and dehumidifiers to pull water out of drywall, insulation, carpet padding, and hardwood. Every job follows IICRC S500 drying standards, and we document readings daily so your insurance claim holds up.
Florida properties face water intrusion from slab leaks, pipe bursts, roof leaks, appliance leaks, sewage backups, and storm surge flooding. The state's humidity slows evaporation, so a wet wall that would dry in two days up north can stay damp for a week and grow mold. If you search water damage restoration near me after a pipe burst at 2 a.m., you need a crew that arrives with extraction equipment, not a callback tomorrow. We handle water damage repair in Florida homes from single-room leaks to whole-house flooding.
Every job starts with a written scope so you know what is covered. Here is what our standard water damage restoration service includes, from the first call to the final walkthrough.
Truck-mounted and portable extraction units pull standing water from carpet, hardwood, and tile. We use a boroscope to check wall cavities and a moisture meter to confirm we got it all. Extraction typically takes two to six hours depending on volume.
Air movers and dehumidifiers pull moisture from drywall, insulation, and framing. We track relative humidity with a hygrometer daily and adjust equipment placement. Drying runs three to five days for most residential jobs, and we do not pull equipment until readings confirm dry.
After extraction, we apply antimicrobial spray to affected surfaces to stop mold growth. For Category 3 water like sewage backups, we remove contaminated drywall and insulation before treatment. Our AMRT-certified technicians handle the remediation.
We photograph moisture readings, write estimates in Xactimate, and provide a final report with photos and daily readings. That documentation goes straight to your adjuster. We bill your carrier directly so you are not fronting the cost.
Once the structure is dry, we replace drywall, baseboards, carpet padding, and damaged flooring. We test the repaired plumbing line and verify no moisture remains. You get a final walkthrough and a written warranty on the drying work.
You call, we answer. We ask what happened, how long the water has been running, and whether sewage is involved. Within minutes we dispatch the nearest crew with a water extraction unit, moisture meter, and thermal imaging camera. You get an arrival window, not a vague promise.
On arrival we shut off the water source if it is still running, then walk the property with a moisture meter and thermal imaging camera. We classify the water (Category 1, 2, or 3) and map the affected area. You get a written scope and a clear explanation before we start work.
Truck-mounted and portable extraction units pull standing water from carpet, hardwood, and tile. For sewage backups we use a boroscope to check wall cavities and apply antimicrobial spray. Extraction typically takes two to six hours depending on volume and access.
We place air movers and dehumidifiers to pull moisture from drywall, insulation, and framing. A hygrometer tracks relative humidity daily, and we adjust equipment placement as readings change. Most residential dry-downs run three to five days. We do not pull equipment until readings confirm dry.
Once the structure is dry, we replace drywall, baseboards, carpet padding, and any damaged flooring. We test the repaired plumbing line, verify no moisture remains, and walk the property with you. You get a final report with photos and readings for your insurance file.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Locates hidden moisture behind walls, under floors, and in ceilings without cutting into the structure. We use it during inspection and again before final walkthrough.
Measures moisture content in drywall, wood, and concrete, and tracks relative humidity in the air. We record readings daily to confirm the structure is drying on schedule.
Pulls thousands of gallons of standing water from carpet, hardwood, and tile. It is the fastest way to remove bulk water before drying begins.
Air movers circulate air across wet surfaces while dehumidifiers pull moisture from the air. Together they dry drywall, insulation, and framing in three to five days.
A camera on a flexible rod that lets us inspect inside wall cavities and under floors without demolition. We use it to check for hidden water and mold growth.
Ozone generators neutralize odors from sewage and storm water. HEPA vacuums capture mold spores and fine debris during remediation.
Applied after extraction to stop mold growth on affected surfaces. Sealant locks in treated areas before we rebuild.
A supply line burst under the kitchen sink at 11 p.m. Water spread across 400 square feet of tile and soaked the baseboards and lower drywall. The homeowner called us within the hour.
We extracted 60 gallons of water, removed wet baseboards, and dried the structure in four days. Moisture readings returned to normal, and we replaced the baseboards and repainted. No mold growth.
A sewage backup filled a 200-square-foot bathroom and hallway. Contaminated water soaked the drywall and vinyl flooring. The tenant was displaced.
Our AMRT-certified crew contained the area, extracted the waste, removed contaminated drywall and insulation, and applied antimicrobial spray. The unit was dry in five days and the tenant returned the following week.
Storm surge pushed two inches of water into a lakefront home, soaking 600 square feet of carpet and hardwood. The water sat for six hours before the homeowner called.
We extracted the water, removed wet carpet padding, and dried the slab and hardwood in six days. We replaced the padding and reinstalled the carpet. Moisture readings confirmed dry before we pulled equipment.
Water damage is not one problem. It is a chain reaction. Here are the most common issues we see and how we stop them.
Ask a pro →We shut off the water, extract standing water with truck-mounted units, and dry the structure with air movers and dehumidifiers. We test the repaired line and replace damaged drywall and baseboards. Most jobs are dry in three to five days.
Our AMRT-certified technicians contain the area, extract the waste, remove contaminated materials, and apply antimicrobial spray. We dry the remaining structure and document everything for your insurance claim.
We locate the leak with a thermal imaging camera, extract the water, and dry the slab and flooring. We work with a licensed plumber to repair the line, then replace damaged flooring and baseboards.
We extract the water, remove contaminated materials, apply antimicrobial spray, and dry the structure with desiccant dehumidification. We document everything for your flood insurance claim and handle the rebuild.
Most residential jobs run $1,200 to $6,500 in 2026, depending on water category, square footage, and how long the water sat. A single-room Category 1 leak might be $1,200 to $2,800. Sewage backups and storm flooding push higher. We provide a written estimate the same day and bill your insurance directly when coverage applies.
Extraction takes two to six hours. Drying typically runs three to five days for a single room and seven to ten days for whole-house flooding. Florida humidity slows evaporation, so we monitor with a hygrometer daily and do not pull equipment until readings confirm the structure is dry. Repairs add one to three weeks depending on scope.
Most Florida policies cover sudden and accidental water damage, like a pipe burst or appliance leak. Flood and storm surge damage requires separate flood insurance. We document everything in Xactimate, photograph moisture readings, and bill your carrier directly. We can walk you through what your policy likely covers before work begins.
The best company is the one that answers at 2 a.m., arrives with extraction equipment, and documents the dry-down with meter readings. Look for IICRC WRT and ASD certifications, a Florida Mold-Related Services License, and direct insurance billing. We carry all of those, and we provide a written scope before we start.
We deliver water damage restoration across Florida, from the Panhandle to the Keys. Our crews stage equipment in multiple regions so we can reach Miami, Panama City, Sebring, and points between without waiting on a single warehouse. Whether you need emergency water damage restoration Florida response or a scheduled dry-down, we dispatch the nearest crew with the right equipment for your building type.
Emergency Water RemovalWhen a pipe bursts at 2 a.m., our emergency water removal crews extract standing water before it spreads. We handle the extraction, then transition directly into drying and restoration. One call covers the whole job.Explore →
Flood CleanupStorm surge and heavy rain push water into Florida homes fast. Our flood cleanup crews remove contaminated water, apply antimicrobial spray, and dry the structure. We document everything for your flood insurance claim.Explore →
Water ExtractionTruck-mounted water extraction units pull thousands of gallons from carpet, hardwood, and tile. We use a boroscope to check wall cavities and a moisture meter to confirm we got it all. Extraction is the first step in every restoration job.Explore →
Drying and DehumidificationAir movers and dehumidifiers pull moisture from drywall, insulation, and framing. We track relative humidity with a hygrometer daily and adjust equipment placement. Drying typically runs three to five days before we verify dry-down.Explore →
Sewage Backup CleanupSewage backups are Category 3 water and require full containment. We extract the waste, apply antimicrobial spray, and remove contaminated drywall and insulation. Our AMRT-certified technicians handle the remediation safely.Explore →
Storm Damage RestorationFlorida thunderstorms and tropical systems drive rain through roofs and windows. We tarp, extract, dry, and rebuild. Our crews handle everything from a single roof leak to whole-home storm flooding.Explore →
Hurricane Water Damage RestorationHurricane surge and wind-driven rain cause some of the worst water damage we see. We stage equipment before landfall and respond as soon as it is safe. Extraction, drying, and rebuild under one roof.Explore →
Basement Water Damage RepairFlorida basements flood from sump pump failures, foundation seepage, and slab leaks. We extract the water, dry the space, and repair the source. Battery backup sump pumps and flood barriers help prevent the next one.Explore →We answer 24/7 and dispatch the nearest crew with extraction and drying equipment. Licensed, insured, and IICRC-certified. One call gets water damage cleanup Florida property owners trust, with direct insurance billing and a written scope before we start.
Call Now 0001112222 →Call 0001112222 and describe what is wet. We answer 24/7, including holidays, and dispatch a licensed, insured crew to your Florida address. If water is still running, shut off the main before you call so the damage stops spreading.