When water is rising or already pooled in your home, flood cleanup in Florida has to start fast. We handle flood water removal Florida homeowners and property managers rely on, from storm surge and burst pipes to sewage backups, across the entire state. Our IICRC-certified crews extract, dry, and sanitize so mold never gets a foothold. Call and we roll.
Flood cleanup in Florida is the process of removing standing water, extracting saturated materials, drying the structure to verified moisture levels, and sanitizing every affected surface so the building is safe to occupy again. It is not a shop-vac job. We use moisture meters and thermal imaging cameras to map water you cannot see, then pull it out with truck-mounted water extraction units before it wicks into drywall, insulation, and carpet padding.
Florida properties flood for reasons that have nothing to do with a named storm. A slab leak under a tile floor, a pipe burst behind a bathroom wall, a roof leak that shows up as a ceiling water stain three days later, or a sewage backup during a summer downpour all call for the same response. When you search flood cleanup near me after one of those nights, you need a crew that answers at 2 a.m. and arrives with equipment, not a call center that schedules you for Thursday.
Every flood cleanup job includes the core work: extraction, removal of saturated materials, structural drying, sanitizing, and documentation. Add-ons like content pack-out, duct cleaning, or full reconstruction are quoted separately when the job calls for them. Here is what you can count on as part of the standard scope.
Truck-mounted extraction units pull standing water out of carpet, padding, and hard floors. We extract until the surface is no longer holding water, then switch to drying equipment to finish the job.
Carpet padding, wet insulation, and unsalvageable drywall come out and get bagged for disposal. We cut clean lines and leave the structure ready for drying, not a pile of debris for you to deal with.
Air movers and dehumidifiers run until moisture readings hit dry standard. We monitor daily with moisture meters and a hygrometer, adjusting equipment placement as the structure dries.
Affected surfaces get an antimicrobial spray after drying to stop mold growth. Contaminated areas get HEPA vacuuming first, and we use an ozone generator for stubborn odors when needed.
We photograph the affected area, log moisture readings, and build the scope in Xactimate. You get a complete record of what was wet, what we removed, and what it cost, ready for your adjuster.
You call, we answer, and we ask the questions that matter: where is the water coming from, how deep is it, and is there electricity nearby. A crew is dispatched with extraction and drying equipment. Same-day response is standard, and we work nights and weekends because floods do not check the clock.
We walk the property with moisture meters, a hygrometer, and a thermal imaging camera to find water hiding behind walls and under floors. A boroscope goes into wall cavities where needed. You get a clear picture of the affected area before any equipment is set, and we explain what we found.
Truck-mounted water extraction units pull standing water out fast. Saturated carpet padding, insulation, and unsalvageable drywall are removed and bagged. We set up a flood barrier or containment where needed to keep the rest of the home dry and clean while we work.
Air movers and desiccant or refrigerant dehumidifiers run around the clock, with drying mats on hardwood and cavity drying where walls were opened. We monitor with moisture meters daily and adjust equipment until readings match dry-standard targets. Most residential jobs dry in three to five days.
Once materials are dry, we HEPA vacuum, apply antimicrobial spray to affected surfaces, and use an ozone generator where odors linger. A final moisture check confirms the structure is dry. We walk you through the results, hand off documentation for your claim, and leave the space ready to use.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds water hidden behind walls and under floors by temperature difference, so we open the right cavities instead of guessing.
Reads moisture content in materials and humidity in the air. We log readings daily to track drying progress and confirm when the job is done.
Pulls standing water and water trapped in carpet and padding faster than portable units, which shortens the drying window.
Move air across wet surfaces to speed evaporation. Placement is set per the drying plan, not scattered around the room.
Pulls moisture out of the air in tight or cool spaces where refrigerant units are less effective, like crawl spaces and closed rooms.
Lets us look inside wall cavities without tearing them open, so we can confirm moisture and mold before cutting.
Neutralizes smoke and musty odors after the structure is dry. We run it in unoccupied spaces and air them out before you return.
A supply line failed behind a bathroom wall overnight. Water spread under tile into the hallway and soaked the baseboards. The homeowner found it when the floor felt spongy the next morning.
We extracted the standing water, removed wet baseboards and drywall, and dried the slab and framing with air movers and a dehumidifier. Moisture readings hit dry standard in four days, and the repair was scoped in Xactimate for the claim.
A storm overwhelmed the lateral line and sewage backed up into a ground-floor bathroom and hallway. Contaminated water spread under the vinyl flooring and into the adjacent closet.
The crew set containment, removed the contaminated flooring and drywall, HEPA vacuumed, and disinfected the space. Drying equipment ran for three days, and the unit passed a final moisture check before the tenant moved back in.
Storm surge pushed two inches of water into a garage and laundry room. The water receded, but the block walls and the floor plate stayed wet and the space smelled musty within a day.
We extracted the water, opened the lower drywall to dry the wall cavity, and ran desiccant dehumidifiers for five days. The musty smell cleared, and moisture readings confirmed the walls were dry before we closed them up.
Most flood calls come down to a handful of problems, and each one has a different fix. Here is what we run into most and how we handle it.
Ask a pro →We use thermal imaging and moisture meters to find water under floors, then extract and dry with drying mats and air movers. If the floor cannot be saved, we remove it, dry the subfloor, and document the loss for your claim.
Our crews contain the area, remove contaminated materials, HEPA vacuum, and disinfect with hospital-grade products. We verify with moisture readings and do not release the space until it is clean and dry.
We open the ceiling where needed, dry the cavity with directed air, and check the insulation. If the roof is still leaking, we tarp it and coordinate repair so the drying actually holds.
We pump out standing water, dry the joists and insulation, and check the vapor barrier. Where the source is a failing sump, we install a sump pump liner or a battery backup sump pump to prevent the next flood.
Most residential flood cleanup jobs in Florida run $1,500 to $6,000 in 2026, with small single-room extractions closer to $800 and whole-floor Category 3 jobs above $10,000. Square footage, water category, and how long the water sat drive the number. We give you an upfront price before equipment is set, and we document everything in Xactimate so your carrier sees the same figures.
Flood cleanup includes water extraction, removal of saturated carpet padding and unsalvageable drywall, structural drying with air movers and dehumidifiers, HEPA vacuuming, antimicrobial treatment, and a final moisture verification. We also photograph the affected area and build an insurance scope. Odor treatment with an ozone generator is added when needed. You get a dry, sanitized space and a documented record of the work.
Standard homeowners policies usually cover sudden interior releases like a pipe burst or appliance leak, but not rising floodwater, which requires a separate flood policy through the NFIP or a private carrier. Storm surge and overflow are typically excluded from HO policies. We document the loss in Xactimate and photograph everything so your adjuster can process the claim quickly, whichever policy applies.
Call a certified crew before you start hauling wet materials yourself. Shut off power to affected rooms if it is safe, and do not walk through standing water near outlets. We handle extraction, remove saturated materials, dry the structure to verified moisture levels, and sanitize surfaces. DIY cleanup usually misses water behind walls and under floors, which is where mold starts within 24 to 48 hours.
We deliver flood cleanup across Florida, from Miami-Dade and Broward through Central Florida and the Gulf Coast. Each market has its own building stock and storm patterns, and our crews plan the job around them. If you are searching for Florida flood cleanup services near you, we cover the cities below and the communities around them.
Water Damage RestorationWhen flood cleanup turns into structural repair, our restoration crews handle drywall, flooring, and trim so you are not coordinating a second contractor. We take the job from wet to finished.Explore →
Emergency Water RemovalStanding water is the first thing to go. Our emergency water removal crews pull water out with truck-mounted extraction units, often within hours of your call, before it spreads into more rooms.Explore →
Water ExtractionCarpet, padding, and subfloor hold more water than a shop vac can reach. We use weighted extraction and water extraction units to pull water out of materials, not just off the surface.Explore →
Drying and DehumidificationExtraction gets the bulk of the water; drying gets the rest. We set air movers and dehumidifiers, monitor with moisture meters daily, and do not stop until readings hit dry standard.Explore →
Sewage Backup CleanupSewage is Category 3 water and needs containment, PPE, and disinfection, not a mop. We remove contaminated materials, treat the area, and verify it is clean before you use the space again.Explore →
Storm Damage RestorationAfter a storm pushes water through a roof or window, we handle the water and the damage it left behind, from tarp-over and extraction to drywall and paint.Explore →
Hurricane Water Damage RestorationHurricane flooding brings storm surge, wind-driven rain, and sometimes both. We stage crews and equipment ahead of landfall so we can start extraction as soon as it is safe to work.Explore →
Basement Water Damage RepairBasement seepage and sump failures are common in Florida's older homes. We extract, dry, and repair the source, including sump pump liner and battery backup sump pump work.Explore →Water spreads while you wait. Call and a certified crew is dispatched with extraction and drying equipment. We answer 24/7, give you an upfront price, and document everything for your claim. One call gets the water out.
Call Now 0001112222 →Call 0001112222 and describe what is wet. We answer 24/7, including holidays, and dispatch a licensed, insured crew to your Florida address. If water is still running, shut off the main before you call so the damage stops spreading.